Label applicators increase productivity and help the bottom line. Every business that uses labels can benefit from this label applicator.
Towa applicators use an exclusive label edge detector which automatically detects the leading edge of the label providing complete accuracy in dispensing. Each of three applicators can dispense any type of label and requires no special liner tool, cartridges or cassettes.
Towa has these unique features:
*Easy side web loading minimizes threading time
*Exclusive label edge detector eliminates need for special liner slits of perforations
*Positive feed roller provides proper dispensing
Towa Applicator Specifications Model | STROKE | WIDTH | Max Outer Diameter |
Towa AP65-30 | 20-60 mm | 20-30 mm | 100 mm |
Towa AP65-30 | 20-60 mm | 20-30 mm | 100 mm |
Towa AP65-100 | 20-60 mm | 20-30 mm | 100 mm |
Determining Your Towa Applicator Needs The following specifications offer guidelines to use when selecting the appropriate dispenser for your needs.
Dimension 30mm 60mm 100mm
Roll Size 88.9mm OD
3 1/2" 88.9mm OD
3 1/2" 88.9mm OD
3 1/2"
Core Size 25.4mm ID 1" 25.4mm ID 1" 25.4mm ID 1"
Max Label Width 28.575mm
1 1/8" 57.15mm
2 1/4" 98.425mm
3 7/8"
Min Label Width 20mm
13/16" 25mm
15/16" 55mm
15/16"
Max Label Repeat 63.5mm
2 1/2" 63.5mm
2 1/2" 63.5mm
2 1/2"
Min Label Repeat 6.35mm
1/4" 6.35mm
1/4" 6.35mm
1/4"
Die Cut Only YES YES YES
Notes: OD refers to "Outer Dimension" of the roll, while ID refers to "Inner Dimension" of the core. "Label Repeat" indicates the distance from the beginning of one label to the beginning of the next label.
Loading the Towa Applicator Directions
How to use Labeler (Towa Applicator)
1. Remove label guide by turning to the right and place your roll of labels onto the spooler. Replace the guide by pressing inward and turning to the left.
2. Pull labels under the transparent pressure plate. Open the bottom gate, releasing the latch marked "OPEN" (do not force), and thread label edge along the bottom gate.
3. Close the bottom gate by returning the latch marked "OPEN" back into the locked position. The serrated edge is used to remove the excess label liner.
4. Labels are released as you squeeze the handle. As you squeeze, pull the applicator along in a fluid motion over the surface of the item being labeled.
Cleaning/Removing Stuck Labels
Unscrew 2 screws. Easily remove stuck label by solvent for strong adhesive.
Notice: It's unnecessary to make a slit or slot on backing paper for feeding of labels.
Film with less than 50øm thickness is unacceptable
Use only die-cut labels
A cotton-swab moistened with ALCOHOL, is recommended to wipe adhesive from Mecha-Sensor